Broadkite

Cold email: how to send campaigns that reach the inbox

Cold email that lands: a separate domain with SPF, DKIM and DMARC, a few weeks of warmup, about 50 sends a day per mailbox, complaints under 0.1%.

On this page
  1. What is cold email?
  2. What do Gmail, Yahoo and Outlook require from senders?
  3. Set up a separate domain and real mailboxes
  4. Warm up every new mailbox before campaigns
  5. How many cold emails can one mailbox send a day?
  6. Build a list you can stand behind
  7. Write short emails people answer
  8. Watch the numbers providers act on
  9. Run campaigns from your AI assistant
  10. Checklist before your first send

Cold email is a one-to-one message to someone who has never heard from you, sent because your offer fits their business. In 2026 it reaches the inbox when four things hold: the sending domain passes SPF, DKIM and DMARC, each mailbox sends a modest daily volume after a few weeks of warmup, every address on the list is verified, and almost nobody marks you as spam. Google advises keeping that spam rate under 0.10%.

This guide takes each step in the order you set it up, with the numbers the mailbox providers publish and the defaults Broadkite sends by. Every section links to a longer post.

What is cold email?

Cold email is unsolicited email to a specific person at a specific business, written for them, with one request. Three things separate it from a newsletter:

  • Volume. Tens of emails per mailbox per day, spread over many mailboxes, instead of thousands from one sending server.
  • Targeting. A list you built for a reason, instead of a list that signed up.
  • Measurement. Replies and meetings, instead of opens.

It is legal in the United States when it follows CAN-SPAM: honest headers and subject line, a postal address, and an opt-out you honor within 10 business days. The FTC’s compliance guide is explicit that the law “makes no exception for business-to-business email”. Is cold email legal? goes through the rules one by one.

What do Gmail, Yahoo and Outlook require from senders?

The three largest consumer mailbox providers published sender rules in 2024 and 2025. Their bulk thresholds start around 5,000 messages a day, more than most cold email programs send. Meet the authentication half anyway: it is how a provider tells your mail apart from someone spoofing your domain, and Gmail and Yahoo require SPF or DKIM from every sender.

Rule Gmail Yahoo Outlook.com
In force since February 1, 2024 February 2024 May 5, 2025
Applies in full above 5,000 a day to Gmail “Bulk senders” 5,000 a day
SPF and DKIM Both for bulk, one for everyone Both for bulk, one for everyone Both must pass
DMARC Required for bulk, aligned with SPF or DKIM At least p=none, must pass At least p=none, aligned
Spam rate Below 0.3% required, below 0.10% advised Below 0.3% Not published
Unsubscribe One-click for marketing mail One-click, honored within 2 days Visible unsubscribe recommended

Sources: Google’s email sender guidelines, Yahoo Sender Hub best practices and Microsoft’s April 2, 2025 announcement for high-volume senders. Our posts on the Gmail and Yahoo bulk sender rules and Outlook’s 550 5.7.515 rejection cover each provider in depth.

Set up a separate domain and real mailboxes

Send cold email from a domain that is not your main one, such as getacme.com next to acme.com. If a campaign earns complaints, the reputation it damages belongs to that domain, and your invoices, support replies and team mail keep landing.

Give each domain a few real mailboxes on Google Workspace or Microsoft 365, each with a person’s name, a photo and a signature. Then authenticate the domain:

  • SPF lists the services allowed to send for the domain. It allows at most 10 DNS lookups, and every include: counts.
  • DKIM signs each message. Sign with your own domain, not the provider’s default one, so the signature lines up with your From address.
  • DMARC tells receivers what to do when a message fails, and sends you reports on who sends as you. Start at p=none.

Alignment is the step most setups miss: DMARC passes only when the domain in the From header matches the domain SPF or DKIM authenticated. SPF, DKIM and DMARC alignment for cold email shows how to read it in a message header, and how many mailboxes and domains you need does the arithmetic for a target volume.

Warm up every new mailbox before campaigns

A new mailbox has no sending history, and providers treat unknown senders with caution. Warmup gives it one. The mailbox exchanges small amounts of ordinary mail with other mailboxes that open it, reply to it and move it out of spam, while the daily count rises slowly.

Broadkite starts a mailbox at 10 warmup emails a day and adds 1 a day up to 40. Warmup keeps running after campaigns start, on its own budget, so cold volume never eats into it. Plan for a few weeks before a new domain carries a full campaign. How email warmup actually works explains the pool, the ramp and the checks that keep the pool clean, and getting a burned mailbox back covers the recovery path.

How many cold emails can one mailbox send a day?

About 50 a day is a safe ceiling for most cold mailboxes, with at least 10 minutes between two sends from the same mailbox. Those are Broadkite’s defaults (50 a day, 600 seconds apart), and the dashboard warns when you set a mailbox above 100. Start a new mailbox at 10 to 20 a day and raise it while its numbers stay clean.

Volume grows by adding mailboxes, not by pushing one harder. Ten mailboxes at 50 a day send 500 emails a day, spread across domains and across each provider’s per-account limits. How many cold emails per day per mailbox walks through the ramp, and mailbox budgets explains why the limit belongs to the mailbox.

Build a list you can stand behind

Every bounce and every complaint comes from the list, so the list decides more of your deliverability than any setting.

  1. Pick one narrow segment where your offer obviously fits, such as dental clinics in Austin with fewer than 20 staff.
  2. Find the person who decides. At a local business that is usually the owner, often named on the website’s About page.
  3. Verify every address before the first send. A bounce rate of a few percent tells providers the list was bought or guessed.
  4. Keep one suppression list across campaigns, so a person who opted out once never hears from you again.

Local businesses are listed on Google Maps and OpenStreetMap with a category, an address and usually a website, which makes them one of the easier lists to build well. Google Maps lead generation covers the sources, what their terms allow, and how to get from a listing to a person’s email.

Write short emails people answer

A cold email that gets replies reads like a note from a person: a subject of a few words, a first line about the recipient, one sentence on what you do for businesses like theirs, and a question that is easy to answer. Send it as plain text, or as HTML that looks like plain text, with one link at most.

Leave open tracking off. Apple Mail downloads remote images in the background when a message arrives, so many recorded opens never happened, and the invisible image does nothing for the reader. Count replies instead. Email open tracking in cold email explains what opens still tell you and when a tracked link is worth it.

Follow up two or three times, a few days apart, and stop the sequence for anyone who replies.

Watch the numbers providers act on

A 99% delivery rate means the receiving server accepted the message. It says nothing about whether a person saw it in the inbox. These are the numbers that predict trouble, and the points where Broadkite acts on a mailbox:

Signal Broadkite acts at What happens
Spam complaints 0.03%, then 0.10% Watched, then out of the shared warmup pool for 7 days with campaigns paused
Hard bounces 5% Out of the shared warmup pool for 7 days with campaigns paused
Spam placement at Gmail, Outlook and Yahoo 10%, then 20% Watched, then warmup and campaigns at half volume until it recovers
Replies Falling for two weeks Nothing automatic: the list or the copy stopped fitting

The complaint line sits at Google’s advised 0.10%. At 50 sends a day, that is about one complaint per mailbox per month. Delivery rate is not inbox placement, the complaint rate that gets you throttled and quarantine early explain each threshold.

Run campaigns from your AI assistant

Most of the work around cold email is lookup and drafting: who replied, which segment comes next, what to answer to a pricing question. Broadkite exposes that work as tools over MCP, the Model Context Protocol that Claude, Cursor and other assistants use to call outside software. Connected in one command, an assistant can build a segment, draft a three-step campaign or prepare answers to replies, with only the access you approve. Sending stays with you. Cold email from Claude with MCP shows the setup and prompts that work.

Checklist before your first send

  1. A secondary domain with SPF, DKIM signed by your own domain, and DMARC at p=none.
  2. Two to five mailboxes per domain, each with a name, a photo and a signature.
  3. Warmup running for a few weeks, and still running after launch.
  4. One narrow segment, every address verified, the suppression list loaded.
  5. Each mailbox at 10 to 20 a day to start, 50 once it holds steady.
  6. A plain email with one question, open tracking off, an opt-out line.
  7. A valid postal address in the email, and opt-outs honored within 10 business days.
  8. Complaints, bounces and spam placement checked weekly, replies read daily.

Questions

What is cold email?

Cold email is a one-to-one message sent to a person at a business who has not heard from you before, written for them, with one clear request. It is sent in small daily volumes from real mailboxes and is measured by replies rather than opens.

Is cold email legal in the United States?

Yes, when it follows CAN-SPAM: accurate headers and subject line, a valid postal address, a clear way to opt out, and opt-outs honored within 10 business days. The FTC says the law makes no exception for business-to-business email.

How many cold emails can one mailbox send per day?

About 50 a day is a safe ceiling for most cold mailboxes, with at least 10 minutes between two sends from the same mailbox. Start a new mailbox at 10 to 20 a day and grow volume by adding mailboxes rather than pushing one harder.

Should I send cold email from my main domain?

No. Use a separate domain for cold outreach so that complaints from a campaign land on that domain and not on the one your invoices, support replies and team mail depend on.

What spam complaint rate is too high?

Google requires bulk senders to stay below 0.3% and advises staying below 0.10%. Treat 0.10% as the ceiling for cold email, which at 50 sends a day means about one complaint per mailbox per month.

Was this post helpful?

Okay

What helped most?

Keep reading

Send your next campaign from Broadkite

Find leads, write the sequence and send from mailboxes you own, warmed and paced for you. Or ask Claude to draft it.